Part Number Hot Search : 
ZXM63N0 SA78CA CP210 2SB64 RTL8201 LQW15 11EWA 90858
Product Description
Full Text Search
 

To Download EL7182 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 (R)
EL7182
Data Sheet January 1996, Rev. B FN7281
2-Phase, High Speed CCD Driver
The EL7182 is extremely well suited for driving CCD's, especially where high contrast imaging is desirable. The 16V supply rating is attractive for higher voltage CCD applications, as in color fax machines. The input is TTL and 3V compatible. The low quiescent current requirement is advantageous in portable/battery powered systems. The EL7182 is available in 8-pin PDIP and 8-lead SO packages.
Features
* 3V and 5V Input compatible * Clocking speeds up to 10MHz * Reduced clock skew * 20ns Switching/delay time * 2A Peak drive * Low quiescent current * Wide operating voltage--4.5V-16V
Pinout
EL7182 (8-PIN PDIP, SO) TOP VIEW
Applications
* CCD Drivers requiring high-contrast imaging * Differential line drivers * Push-pull circuits
Ordering Information
PART NUMBER Manufactured under U.S. Patent Nos. 5,334,883, #5,341,047 EL7182CN EL7182CS TEMP. RANGE -40C to +85C -40C to +85C PACKAGE 8-Pin PDIP 8-Pin SO PKG. NO. MDP0031 MDP0027
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright (c) Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc. All other trademarks mentioned are the property of their respective owners.
EL7182
Absolute Maximum Ratings (TA = 25C)
Supply (V+ to Gnd) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5V Input Pins . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +0.3V above V+ Combined Peak Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . .4A Storage Temperature Range . . . . . . . . . . . . . . . . . .-65C to +150C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40C to +85C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 125C Power Dissipation SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .570mW PDIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1050mW
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications
PARAMETER INPUT VIH IIH VIL IIL VHVS OUTPUT ROH ROL IPK IDC POWER SUPPLY IS VS
TA = 25C, V = 15V unless otherwise specified DESCRIPTION TEST CONDITIONS MIN TYP MAX UNITS
Logic "1" Input Voltage Logic "1" Input Current Logic "0" Input Voltage Logic "0" Input Current Input Hysteresis @0V @V+
2.4 0.1 10 0.8 0.1 0.3 10
V A V A V
Pull-Up Resistance Pull-Down Resistance Peak Output Current Continuous Output Current
IOUT = -100mA IOUT = +100mA Source Sink Source/Sink 100
3 4 2 2
6 6
A mA
Power Supply Current Operating Voltage
Input High 4.5
2.5
5 16
mA V
AC Electrical Specifications
PARAMETER SWITCHING CHARACTERISTICS tR tF tD-ON tD-OFF Rise Time Fall Time Turn-On Delay Time Turn-Off Delay Time
TA = 25C, V = 15V unless otherwise specified TEST CONDITIONS MIN TYP MAX UNITS
DESCRIPTION
CL = 500pF CL = 1000pF CL = 500pF CL = 1000pF
7.5 10 10 13 18 20
ns 20 ns 20 25 25 ns ns
2
EL7182 Timing Table
Standard Test Configuration
Simplified Schematic
3
EL7182 Typical Performance Curves
Switch Threshold vs Supply Voltage
Max Power/Derating Curves
Input Current vs Voltage
Peak Drive vs Supply Voltage
Quiescent Supply Current
"ON" Resistance vs Supply Voltage
CASE:
INPUT LEVEL CURVE
GND V+
B D
Average Supply Current vs Voltage and Frequency
Average Supply Current vs Capacitive Load
4
EL7182 Typical Performance Curves
(Continued)
Rise/Fall Time vs Load
Rise/Fall Time vs Supply Voltage
Rise/Fall Time vs Temperature
Propagation Delay vs Supply
Delay Time vs Temperature
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 5


▲Up To Search▲   

 
Price & Availability of EL7182

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X